Industrial Ventilators
Use renewable energy to power your Industrial Vent
- Description
- Specifications
- Warranty
- Downloads
Laserlite Building Products Industrial Turbine Ventilators use renewable wind energy to create a positive flow through the ventilator. Even the slightest wind speeds will cause the head to spin. An area of low pressure is created on the leeward side of the vent and the air drawn out between the vanes on the head of the ventilator feed this low pressure zone.
This process allows for a continuous airflow through the vent. The centripetal forces created by the rotation of the vent will expel the air outwards from the edge of the vanes and this hot and stale air is replaced by cooler and fresh air from outside the building. Thermal currents and temperature differentials will also allow the ventilation process with the vent, even with no wind.
|
Vent Type |
AITV400 |
AITV600 |
AITV900 |
|
|
Throat Area (m3) |
0.071 |
0.283 |
0.636 |
|
|
Total Weight (kg) |
5 |
12 |
25 |
|
|
Overall Diameter (mm) |
480 |
770 |
1100 |
|
|
Overall Height (mm) |
480 |
720 |
940 |
|
|
Throat Diameter (mm) |
480 |
600 |
900 |
|
|
Flashing Size (mm) |
500 x 600 |
900 x 900 |
1200 x 1200 |
Make-up air inlet area should be 3 times that of the exhaust (throat) area.
Features:
|
|
Specifications
|
Part of Vent |
Material |
|
Vanes |
Aluminium 5005 H34 |
|
Plates |
Aluminium 5005 H34 |
|
Angle Adaptor |
Aluminium 5005 H34 |
|
Flashing |
Aluminium 5005 H34 |
|
Dome |
Aluminium 1200 H0 |
|
Brackets |
Aluminium 6060 T591 |
|
Tri-brackets |
Powder Coated Mild Steel |
|
Shaft |
304 Stainless Steel |
|
Upper bearing |
Double row ball bearing – BWF30 – 119Z |
|
Lower bearing |
Single row ball bearing – SB204-12C |
|
Upper bearing assembly |
Glass Reinforced ASA |
|
Upper bearing protector |
Aluminium 1200 HO |
|
Lower bearing protector |
304 Stainless Steel |
|
Note: Tri-bracket and lower bracket bearing only used on 900mm vent |
|
Laserlite Building Products Warrants the above product supplied for installation at the above project has been manufactured to comply with the Australian Standard AS4740-2000 Natural Ventilators Appendix H (wind loading resistance) and Appendix C (Resistance to leakage during Rain).
For a period of 15 Years, Laserlite Building Products warrants that the product WILL remain physically stable.
For Warranty Terms, please contact your local Laserlite Building Products Representative
- Industrial Ventilators Technical Dimensions
- 206.61 KB
- Industrial Ventilators Data Sheet
- 434.74 KB
