Accessories

A wide range of accessories to suit your needs

Laserlite 2000/3000
Multiwall Accessories
Downloads

Laserlite^® Polycarbonate Fixings

Laserlite^® Polycarbonate Fixings cut an expansion hole in the sheet that ensures your Polycarbonate sheet is installed correctly, allowing for thermal expansion and contraction in all conditions. No Pre-Drilling is required.

For installation of roofs over 3m in height or for high wind zones, please contact Laserlite Building Products. Always follow the installation guidelines when installing your polycarbonate sheets.

Please Note: Laserlite Building Products does not recommend Laserlite^® Polycarbonate Fixings for installations in high wind zones. Please contact Laserlite Building Products for recommended fastenings for these applications.

Our Laserlite^® Polycarbonate Fixings are perfect for fastening Polycarbonate Roofing to Metal and Timber.

Recommended Driver:

Suitable Cordless Drill or Screwdriver. Speed: High (Metal), Low (Timber).

Noise Stop Tape

Laserlite® Noise Stop Tape helps reduce crackling and creaking of your roof that can be caused by extreme wind and weather conditions.

Eave Infill Strips

Laserlite® Eave Infill Strips prevent rain, dust, pests and wind entering eaves. They also prevent wind noise and potential roof rattling. They are weather and chemical resistant.

Colours Available: Black and White

Profiles Available: Corrugated, Greca and 5-Rib (note: 5-Rib have a Top and a Bottom strip).

Barge Capping

Barge Cappings to compliment your polycarbonate roofing material to assist making your installation weather tight.

Back Channel Infill Strips

Available in Corrugated, Greca and 5-Rib profiles – inserted inside metal Back Channel Flashing to prevent leaking at walls and fascia.

Aluminium One Piece H-Bar
Standard Colours: Anodised, Mill, Black, White Standard Length: 6m
Easy slot in installation.
Recommended for high wind areas

Aluminium Two Piece H-Bar
Standard Colours: Anodised, Mill, Black, White Standard Length: 6m
Join and Cover edges of Multiwall sheets. Enables ease of sheet replacement.

Aluminium Edge Bar
Standard Colours: Anodised, Mill, Black, White Standard Length: 6m
Easy slot in installation.
Use to start and finish H-Bar assembly.

Aluminium End Cap
Standard Colours: Anodised, Mill, Black, White Standard Length: 6.5m
Cover ends of Laserlite® Multiwall sheets.
To be used in conjunction with End Cap Gasket.

End Cap Gasket
Colour: Black
Standard Gauges: 10mm
Standard Length: 10m rolls
Seal and secure ends of Laserlite® Multiwall sheets. To be used in conjunction with Aluminium End Cap.

H-Bar Gasket
Colour: Black
Standard Gauges: 10mm
Standard Length: 20m rolls
Seal and secure edges of Laserlite® Multiwall sheets. To be used in conjunction with H-Bars and Edge Bars.

Breather Tape
Length: 33m
Allow ventilation and reduce condensation.

Sealing Tape
Length: 50m
Prevent moisture and dust from
entering Laserlite® Multiwall flutes.