Custom Glaze

Modernise outdoor living

  • Description
  • Specifications
  • Warranty
  • Downloads

Perfect for refreshing existing structures – Custom Glaze™ is a 2mm thick D.I.Y flat roofing sheet with lifetime protection*, offering an elegant glass-like look, whilst using conventional installation such as traditional profiled Laserlite® Polycarbonate sheets.

Sheets are simply laid and fastened down one lap over the other with Multipurpose 14 x 65mm fasteners.

Because no expensive glazing bars are required, this new contemporary look sheet is extremely cost-effective.

Standard Lengths Available: 3.0m, 4.0m, 5.0m and 6.0m

Available Colours:  Clear, Diffused Opal and Grey

Width: 2mm.


  • 99.9% UV Protection
  • Easy Installation
  • A solid, flat look without corrugations^
  • NZBC Fire Group Rating 1-S
^Custom Glaze™ offers a full flat pan width of 530mm with overlapping ribs at 610mm.
*please refer to product Warranty for details.

Selecting Custom Glaze

Custom Glaze™ is suitable for a variety of existing and future structures where the rafters are designed to be placed specifically at 610mm centres. Custom Glaze™ is a very cost effective polycarbonate roofing system providing a contemporary stylish flat roof look without the need for expensive glazing bars. Both the overlapping ribs are spaced at 610 centres, allowing the overlapping rib to be positioned on the rafter effectively concealing the ribs when being viewed from below.


The recommended minimum roof pitch for Custom Glaze is five degrees.

Custom Glaze is designed to be installed on purlins at a maximum of 1500mm centres.

For installations in snow prone areas, the purlin spans should be reduced to a maximum of 610mm centres.

Noise Stop Tape should be installed on purlins prior to fixing the sheet to the purlins.

Ensuring your Custom Glaze is presented in pristine condition, there is a protective film on both sides of the sheeting. This film can be peeled back off the sheets at install after drilling the fixing holes and prior to securing the fixing into the rafter.

Custom Glaze has an overlapping rib and an underlapping rib, these are specifically designed so that the exact effective cover is maintained across the structure.

Please ensure the over lapping side fits over the underlapping rib, refer to fixing instructions included in the pack.


Custom Glaze™ branded polycarbonate profiled sheet products (Products) will, at the date of purchase, be free from defects due to faulty manufacture or workmanship in accordance with AS4256.5-2006 (Workmanship clause)

Loss of Light Transmission – Lifetime Warranty

For the commercial life of the Products (subject to the terms below) they will not lose the ability to transmit light.* In the event that a Product fails to comply with this warranty, Laserlite Building Products will provide a full replacement of the Product, or in the case of a discontinued line, its equivalent.

*The loss of light transmission will not exceed 11% in the first 15 years (0.7% per year) from the date of manufacture and 1% per year thereafter, as long as the sheet lasts in its original installation, available to the original purchaser (when tested in accordance with AS/NZS 4257.4-1994 Determination of diffuse light transmission).

Weather Breakage – 10 Year Warranty

Laserlite Building Products warrants that for a period of 10 years from the date of manufacture, the Products (subject to the terms below) will specifically resist damage due to hail measuring up to 25mm in diameter. In the event that a Product fails to comply with this warranty, Laserlite Building Products will provide a full replacement of the Product, or, in the case of a discontinued line, its equivalent.

For Warranty Terms, please download our Warranty Sheet here.

    • Custom Glaze Product Brochure
    • 2.07 MB
    • PDF
    • Custom Glaze Cleaning Guide
    • 444.15 KB
    • PDF
    • Installation Information
    • 261.44 KB
    • PDF
    • Product Warranty
    • 191.35 KB
    • PDF